Looking for:

Windows 10 powershell script to rename computer and join domain free download

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

I have very basic scripting skills and need your help. I need to create ‘one click’ script to prompt user to enter computer name, then join domain. I’d like the domain name, username and password to be saved in the file. I will be running all the files of a usb key so i’m not concerned about security.

I’m a complete noob in this area so if you send on some helpful step by step guides or scripts. The account that joins a PC to the domain must have the privilege to d so, so either hard code it in your script and encrypt the password or you will have to run it on each machine. Thanks, I’m just starting off, I will be running it from local admin account, hoping to store it on a usb stick plug in to my machine, run, type in the net computer name and move on to the next machine.

What version of Windows? I wrote some but I found that windows 7 had and issue until I updated powershell to v3 at least. Yes, you are correct, just in relation to t eNERDgy’s question it is running version 3 or newer so should run fine. Would like to expand on this. I’m assuming this computer or any you run this script on has not joined any domain yet or is at the very least not a member of the same domain you’re attempting to join it to. In that case, the snippet that JitenSh provided is asking you for the credentials of a user on the domain that has the rights to join computers to said domain.

Edit: Neally – apologies Wasn’t paying attention, obviously. Neally is unaware that he provided a snippet other than checking the PowerShell Version. I’m doing a roll out of 50 PC’s in the office. Basically all of them computers have fresh windows 10 installed and local admin account created, they are not joined to any domain.

I’d like to have domain credentials including username and passwords in the code so all I’ll have to type in is the name i wish to give to the computer. This will allow me do do a quick ‘drive-by’. To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks. Hi guys, I have very basic scripting skills and need your help. Can you help? Best Answer. JitenSh This person is a verified professional. Verify your account to enable IT peers to see that you are a professional.

PowerShell expert. I use this Powershell. View this “Best Answer” in the replies below ». Popular Topics in PowerShell. Spiceworks Help Desk. The help desk software for IT. Track users’ IT needs, easily, and with only the features you need. Learn More ». The account that joins a PC to the domain must have the privilege to d so, so either hard code it in your script and encrypt the password or you will have to run it on each machine The best way to understand Powershell is to use.

Robx Mar 27, at UTC. I’m afraid that the link you sent doesn’t work. JitenSh wrote: I use this Powershell. Thanks, does your script gets credentials of currently logged in user? Pure Capsaicin. Neally This person is a verified professional. ThroatPunchDonor This person is a verified professional. Robx wrote: Thanks, does your script gets credentials of currently logged in user?

That one will ask you to enter your credentials. ThroatPunchDonor wrote: Robx wrote: Thanks, does your script gets credentials of currently logged in user? That one will ask you to enter your credentials Would like to expand on this.

Neally Pure Capsaicin. JitenSh Mace. Mike in IT Chipotle. Robx Mar 28, at UTC. This will allow me do do a quick ‘drive-by’ Thanks! This topic has been locked by an administrator and is no longer open for commenting. Read these next

 
 

 

Enter WindowsPowerShell.Windows 10 powershell script to rename computer and join domain free download

 

Summary : Learn how to replace netdom commands with simple Windows PowerShell cmdlets to rename and reboot the computer or join the domain. Hey, Scripting Guy! It seems that I have been hand building a number of computers recently for a computer lab we are setting up at work.

I have written a batch file that uses netdom commands to join the domain. I also use a netdom command to rename the computer, and the shutdown command to restart the computer.

The syntax for each of these three commands is rather complex and convoluted. What gives? Hello AD,. Microsoft Scripting Guy, Ed Wilson, is here. Well this afternoon I am drinking something a bit different. I decided to make a cup of masala chai. The word chai, or many of its variations, simply means tea in many languages. Therefore, to speak of chai tea is redundant. Coupled with an Anzac biscuit , it was quite nice. AD, the reason that you cannot use your batch file containing netdom commands on Windows 7 is that by default Windows 7 does not contain the netdom command.

When it is installed, you still need to go to Programs and Features and turn on the tools you want to load. But you should not load the RSAT only to access netdom, because you can do what you want to accomplish out of the box assuming that your box is not Windows 7 Home edition that does not join domains. AD, your batch file contained at least three commands to rename the computer, join the domain, and to restart the machine. The two netdom commands and the shutdown command are shown here.

In Windows PowerShell 2. In addition, the Windows PowerShell command is easier to read, and they support prototyping. An example of using Windows PowerShell to add a computer to the domain, rename the computer, and reboot the machine is shown here.

The Get-WmiObject cmdlet has an alias of gwmi , and it will also take credentials if required. Because this class returns only one instance, I can use my group and dot trick see My Ten Favorite Windows PowerShell Tricks to directly call the Rename method to rename the computer. After I rename the computer, I use the Add-Computer cmdlet to join the computer to the domain. The Add-Computer cmdlet allows me to specify the credentials that have rights to add computers to the domain, in addition to the name of the domain to join.

Although I did not do it in my example, there is also an ou parameter that allows you to specify the path to the OU that will contain the newly created computer account. The last command, Restart-Computer , appears without any parameters.

This means that the computer will restart within one minute, and it will attempt to cause processes to politely exit generally a good thing.

For emergency type of situations, there is the Force switch that will cause the computer to immediately restart, and not wait on processes to politely exit. The use of this optional parameter can lead to data loss in some situations. In the image that follows, I first use the Get-WmiObject cmdlet to rename the computer. The image shows the return value is 0, which means that the command completed successfully. Next, I use the Add-Computer cmdlet to join the computer to the iammred domain by using the administrator credentials.

The command completed successfully, but a warning message states that a reboot is required for the change to actually take place. The last command shown in the image uses the Restart-Computer cmdlet to restart the computer. I added the WhatIf parameter to illustrate what happens when using the WhatIf parameter and to permit myself time to make the screenshot. After I remove the WhatIf switch, and rerun the Restart-Computer cmdlet, a message box appears that states the computer will shut down in a minute or less.

After the quick reboot, I am able to switch from using a local account to a domain account, because the computer has now joined the domain. The commands are short, sweet, easy to remember, and easy to use. None of these commands require a script, in fact, they could easily be run as imported history commands. For more information about working with the Windows PowerShell history cmdlets, see this collection of Hey, Scripting Guy! AD, that is all there is to using Windows PowerShell to rename a computer and to join it to the domain.

Join me tomorrow for more cool Windows PowerShell stuff. I invite you to follow me on Twitter and Facebook. If you have any questions, send email to me at scripter microsoft. See you tomorrow. Until then, peace. Comments are closed. Scripting Forums. PowerShell Forums. PowerShell on TechCommunity. Skip to main content. February 29th, I need to figure out a way to manage computer Doctor Scripto March 1, We have a problem with the computers in our computer Doctor Scripto March 2, NET Core.

Recordset ADOR. Paste your code snippet. Cancel Ok.

 
 

Rename computer and add join domain powershell script – Stack Overflow.Windows 10 powershell script to rename computer and join domain free download

 
 

Rename-Computer Module: Microsoft. Renames the specified remote computer. The default is the local computer. Prompts you for confirmation before running the cmdlet. If you type a user name, this cmdlet prompts you for a password. Forces the command to run without asking for user confirmation. Specifies a new name for the computer. This parameter is required. The name may not consist entirely of digits, and may not be longer than 63 characters Type: String Position: 0 Default value: None Accept pipeline input: True Accept wildcard characters: False.

Returns the results of the command. Otherwise, this cmdlet does not generate any output. Shows what would happen if the cmdlet runs. The cmdlet is not run. Warning Credential Security Service Provider CredSSP authentication, in which the user credentials are passed to a remote computer to be authenticated, is designed for commands that require authentication on more than one resource, such as accessing a remote network share.

Is this page helpful? Yes No. Any additional feedback? This will defiantly speed up the process of joining multiple computers to the domain. When you join a computer to the domain it will by default go the computers folder.

It is best practice to move the computers from the default folder to a different OU. The PowerShell command requires the distinguished name of the OU. Then click the Attribute Editor and copy the value of distinguishedName. Now add this path to the command, below is the command for my domain. Now you can forget about logging into each computer and manually adding them to the domain. With PowerShell you can quickly add single or multiple computers at a time.

Dumb question: how would you join two or more computers in a domain using a single command, issued from one single machine, in one batch, as long as this command does not run within the context of those yet unjoined machines and how those machines will know that they have been joined? Because if so, then I would not call this a real AD join….

Alternatively, if Windows computers set up in a workgroup have an administrative account with a common username and password, it will probably work. If you were to log on to one of the machines using the Administrator account, you can normally access shared folders on the other machines the same as you would if it were on a domain e.

In theory this would likely work for using the Add-Computer cmdlet. What gives? Hello AD,. Microsoft Scripting Guy, Ed Wilson, is here. Well this afternoon I am drinking something a bit different. I decided to make a cup of masala chai.

The word chai, or many of its variations, simply means tea in many languages. Therefore, to speak of chai tea is redundant. Coupled with an Anzac biscuit , it was quite nice. AD, the reason that you cannot use your batch file containing netdom commands on Windows 7 is that by default Windows 7 does not contain the netdom command.

When it is installed, you still need to go to Programs and Features and turn on the tools you want to load. But you should not load the RSAT only to access netdom, because you can do what you want to accomplish out of the box assuming that your box is not Windows 7 Home edition that does not join domains.

AD, your batch file contained at least three commands to rename the computer, join the domain, and to restart the machine. The two netdom commands and the shutdown command are shown here. In Windows PowerShell 2. In addition, the Windows PowerShell command is easier to read, and they support prototyping.

An example of using Windows PowerShell to add a computer to the domain, rename the computer, and reboot the machine is shown here. The Get-WmiObject cmdlet has an alias of gwmi , and it will also take credentials if required. Because this class returns only one instance, I can use my group and dot trick see My Ten Favorite Windows PowerShell Tricks to directly call the Rename method to rename the computer.

After I rename the computer, I use the Add-Computer cmdlet to join the computer to the domain. The Add-Computer cmdlet allows me to specify the credentials that have rights to add computers to the domain, in addition to the name of the domain to join.